Enter/Exit Programming Mode EAN-8 Guard Insertion
136 Magellan™ 3450VSi
EAN-8 Guard Insertion
This setting enables the insertion of either a missing leading or trailing guard
to a scanned bar code.
To set this feature:
1. Scan the Enter/Exit Programming
Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
DEFAULT
EAN-8 Guard Insertion = Disable
EAN-8 Guard Insertion = Enable
To Next Page
Loading...
