Enter/Exit Programming Mode Codabar Check Character Transmission
222 Magellan™ 3450VSi
Codabar Check Character Transmission
Enables/disables transmission of an optional Codabar check character.
NOTE
Applies only when Codabar Check Character Calcul
ation is
enabled. This item is ignored when the advanced feature, Full
Label Edit, is enabled.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
Codabar Check Character Transmission = Disable
Codabar Check Character Transmission = Enable
To Next Page
Loading...
