Datalogic Magellan 3450VSi - Expand EAN-8 to EAN-13

Enter/Exit Programming Mode Expand EAN-8 to EAN-13
134 Magellan™ 3450VSi
Expand EAN-8 to EAN-13
Enables/disables expansion of EAN/JAN-8 labels to EAN/JAN-13.
To set this feature:
1. Scan the Enter/Exit Programming
Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
DEFAULT
021B00(CR)
Expand EAN-8 to EAN-13 = Disable
021B01(CR)
Expand EAN-8 to EAN-13 = Enable