Datalogic Magellan 3450VSi - QR Code; QR Code Enable

Enter/Exit Programming Mode QR Code Enable
270 Magellan™ 3450VSi
QR Code
QR Code Enable
Enables/disables the ability of the scanner to decode QR Code labels.
To set this feature:
1. Scan the Enter/Exit Programming
Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
DEFAULT
03D700(CR)
QR Code = Disable
03D701(CR)
QR Code = Enable