Datalogic Magellan 3450VSi - PDF 417 Enable

Enter/Exit Programming Mode Standard 2 of 5 Length Control
252 Magellan™ 3450VSi
Standard 2 of 5 Length Control
This feature specifies whether variable-length or fixed-length decoding will be
set for Standard 2 of 5.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and
the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
049700(CR)
Standard 2 of 5 Length Control = Variable Length
049701(CR)
Standard 2 of 5 Length Control = Fixed Length