Enter/Exit Programming Mode Micro PDF 417 Enable
266
Magellan™ 3450VSi
Micro PDF 417
Micro PDF 417 Enable
Enables/disables the ability of the scanner to decode Micro PDF 417 labels.
To set this feature:
1. Scan the Enter/Exit Programming
Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
DEFAULT
Micro PDF 417 = Disable
Micro PDF 417 = Enable