DataBar Expanded Enable Enter/Exit Programming Mode
Product Reference Guide
175
DataBar Expanded
DataBar Expanded Enable
Enables/disables the ability of the scanner to decode DataBar Expanded labels.
NOTE
This value-added feature is a factory-program
med option. Con-
tact your dealer for information ab
out upgrading your system to
include this advanced capability.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
DataBar Expanded = Disable
DataBar Expanded = Enable
To Next Page
Loading...
