Datalogic Magellan 3450VSi - Interleaved 2 of 5 (I 2 OF 5) Enable

Enter/Exit Programming Mode Code 128 Enable
198 Magellan™ 3450VSi
Code 128
Code 128 Enable
Enables/disables the ability of the scanner to decode Code 128 labels.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
009200(CR)
Code 128 = Disable
009201(CR)
Code 128 = Enable
DEFAULT