Enter/Exit Programming Mode Codabar Length 1
226 Magellan™ 3450VSi
Codabar Length 1
If Codabar Length Control is set to Fixed-Length decoding, this feature speci-
fies Codabar first fixed length. If Codaba
r Length Control is set to Variable-
Length decoding, this feature specifies the minimum label length.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan the bar code, Set Codabar Length 1
on page 226 below. You’ll need
to cover any unused bar codes on this and the facing pag
e to ensure that
the scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the Alpha-Numeric Keypa
d in Appendix C
that represent the desired l
abel length. The selectable range for this
option is 03 to 50. Pad all single digit numbers with a leading zero to yield
a two-digit entry (03-50).
4. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
Set Codabar Length 1
DEFAULT
Default setting for this feature = 03
To Next Page
Loading...
