Code 93 Length Control Enter/Exit Programming Mode
Product Reference Guide
233
Code 93 Length Control
This feature specifies whether variable-length or fixed-length decoding will be
set for Code 93.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and
the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
Codabar Length Control = Variable Length
Codabar Length Control = Fixed Length