DataBar Expanded Length 2 Enter/Exit Programming Mode
Product Reference Guide
181
DataBar Expanded Length 2
Length 2 is the maximum label length if in variable length mode, or the second
fixed length if in fixed length mode. Length includes the bar code's data char-
acters only.
NOTE
When in Fixed Length mode, if Length 2 is set t
o the value of 00
(zero), then only Length 1 will apply.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan the bar code, Set DataBar Expanded Length 2 on page 181 below.
You’ll need to cover any unused bar codes on
this and the facing page to
ensure that the scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the Alpha-Numeric Keypa
d in Appendix C
that represent the desired l
abel length. The selectable range for this
option is 00 to 74. Pad all single digit numbers with a leading zero to yield
a two-digit entry (00-74).
4. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
Set DataBar Expanded Length 2
DEFAULT
Default setting for this feature = 4A (length = 74)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
