Datalogic Magellan 3450VSi - Single Cable RS-232 Pacesetter Plus

Single Cable RS-232 Features Enter/Exit Programming Mode
Product Reference Guide 85
Single Cable RS-232 Pacesetter Plus
This option enables the scanner’s ability to send Pacesetter Plus information as
trailers to UPC/EAN bar codes.
To set this feature:
1. Scan the Enter/Exit Progr
amming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and
the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
DEFAULT
050800(CR)
Single Cable RS-232 Pacesetter Plus = Do Not Send
050801(CR)
Single Cable RS-232 Pacesetter Plus = Send