Datalogic Magellan 3450VSi User Manual

Enter/Exit Programming Mode Other UPC/EAN Options
158 Magellan™ 3450VSi
P2 Add-on Minimum Read
This feature specifies the minimum number of times a P2 add-on must decode
before it is marked valid.
To set this feature:
1. Scan the Enter/Exit Programming
Mode bar code.
2. Scan the bar code representing the des
ired option on this and the follow-
ing page. You’ll need to cover any unused bar codes on facing pages to
en
sure that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
DEFAULT
005F02(CR)
P2 Add-on Minimum Read = 2
005F03(CR)
P2 Add-on Minimum Read = 3
005F04(CR)
P2 Add-on Minimum Read = 4
005F05(CR)
P2 Add-on Minimum Read = 5
005F06(CR)
P2 Add-on Minimum Read = 6

Datalogic Magellan 3450VSi Specifications

General

Standard interfaces	RS-232
Connectivity technology	Wired
Type	Fixed bar code reader
Sensor type	LED
Scanner type	1D/2D
Read rate (max)	39000000 reads/s
Yaw reading angle	-75 - 75 °
Tilt reading angle	0 - 360 °
Pitch reading angle	-65 - 65 °
Light levels (direct sunlight)	0 - 86000 lx
Linear (1D) barcodes supported	-
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, MaxiCode, QR Code
Input voltage	100-240 V
Input frequency	50-60 Hz
Power source type	AC
Power consumption (standby)	2.6 W
Power consumption (typical)	3 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black
International Protection (IP) code	IP52
Sustainability certificates	RoHS
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	94 mm
Width	152 mm
Height	137 mm
Weight	600 g