Datalogic Magellan 3450VSi - Databar Limited EAN128 Emulation Enable

Enter/Exit Programming Mode DataBar Limited EAN128 Emulation Enable
174 Magellan™ 3450VSi
DataBar Limited EAN128 Emulation Enable
Enables/disables GS1-EAN128 emulation for GS1 Databar Limited.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
036300(CR)
Databar Limited EAN128 Emulation = disable
036301(CR)
Databar Limited EAN128 Emulation = enable