Datalogic Magellan 3450VSi - Codabar Enable

EAN-128 Enable Enter/Exit Programming Mode
Product Reference Guide 207
EAN-128
EAN-128 Enable
Enables/disables the ability of the scanner to translate EAN128 labels to the
EAN128 data format.
To set this feature:
1. Scan the ENTER/EXIT Prog
ramming Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence
by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DEFAULT
02D800(CR)
EAN-128 = Transmit EAN128 labels in Code128 data format
02D801(CR)
EAN-128 = Transmit EAN128 labels in EAN128 data format