Datalogic Magellan 3450VSi User Manual

Coupon Label Priority Timer Enter/Exit Programming Mode
Product Reference Guide 115
Coupon Label Priority Timer
This feature sets the duration of the UPCA / DataBar coupon label priority timer.
To set this feature:
1. Scan the Enter/Exit Progr
amming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and
the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
037F0A(CR)
Coupon Label Priority Timer = 0.1 Seconds
037F14(CR)
Coupon Label Priority Timer = 0.2 Seconds
DEFAULT
037F1E(CR)
Coupon Label Priority Timer = 0.3 Seconds
037F28CR)
Coupon Label Priority Timer = 0.4 Seconds
037F32(CR)
Coupon Label Priority Timer = 0.5 Second
037F64CR)
Coupon Label Priority Timer = 1 Second

Datalogic Magellan 3450VSi Specifications

General

Standard interfaces	RS-232
Connectivity technology	Wired
Type	Fixed bar code reader
Sensor type	LED
Scanner type	1D/2D
Read rate (max)	39000000 reads/s
Yaw reading angle	-75 - 75 °
Tilt reading angle	0 - 360 °
Pitch reading angle	-65 - 65 °
Light levels (direct sunlight)	0 - 86000 lx
Linear (1D) barcodes supported	-
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, MaxiCode, QR Code
Input voltage	100-240 V
Input frequency	50-60 Hz
Power source type	AC
Power consumption (standby)	2.6 W
Power consumption (typical)	3 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black
International Protection (IP) code	IP52
Sustainability certificates	RoHS
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	94 mm
Width	152 mm
Height	137 mm
Weight	600 g