GS1 Datamatrix Enable Enter/Exit Programming Mode
Product Reference Guide
261
GS1 Datamatrix Enable
Enables/disables the ability of the scanner to decode GS1 Datamatrix labels.
To set this feature:
1. Scan the Enter/Exit Progr
amming Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
DEFAULT
GS1 Datamatrix disabled
GS1 Datamatrix enabled
To Next Page
Loading...
