Datalogic Magellan 3450VSi - Label ID; Label ID Control

Enter/Exit Programming Mode Label ID
102 Magellan™ 3450VSi
Label ID
Label ID Control
This feature specifies whether or not Label IDs are transmitted to the host and
if so, whether to attach them as a prefix or suffix.
Choices are:
•Disable
• Enable as a Prefix
• Enable as a Suffix
To select the option for Label ID Control:
1. Scan the Enter/Exit Programming
Mode bar code.
2. Scan the desired option from the bar codes below. You’ll ne
ed to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
020500(CR)
Label ID Control = Disable
020501(CR)
Label ID Control = Enable as a Prefix
DEFAULT
020502(CR)
Label ID Control = Enable as a Suffix