Dell N1100-ON

Dell EMC Networking CLI 196
Switch Management Commands
Application Deployment
Auto-Install
show vrrp interface Displays all configuration information and
VRRP router statistics of a virtual router
configured on a specific interface.
UE or
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
application install Installs or removes a Dell-supplied application. GC
application start Schedules a Dell-supplied application for
immediate execution on the stack master.
GC
application stop Stops a Dell-supplied application if the
application is executing on the stack master.
GC
show application Displays installed applications and optionally
displays application files.
GC
Command Description Mode
a
boot auto-copy-sw Enables or disables Stack Firmware
Synchronization.
GC
boot auto-copy-sw allow-
downgrade
Enables downgrading the firmware version on
the stack member if the firmware version on the
manager is older than the firmware version on
the member.
GC
boot host auto-reboot Enables rebooting the device (no administrative
intervention) when the auto-image is
successfully downloaded.
GC
boot host auto-save Enables/disables automatically saving the
downloaded configuration on the switch.
GC
Command Description Mode
a