Dell N1100-ON

Dell EMC Networking CLI 197
CLI Macro
Clock
boot host dhcp Enables/disables Auto Config on the switch. GC
boot host retry-count Set the number of attempts to download a
configuration.
GC
show auto-copy-sw Displays Stack Firmware Synchronization
configuration status.
PE
show boot Displays the current status of the Auto Config
process.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
macro name Creates a user-defined macro. GC
macro global apply Use to apply a macro. GC
macro global trace Applies and traces a macro. GC
macro global description Appends a line to the global macro description. GC
macro apply Use to apply a macro. IC
macro trace Applies and traces a macro. IC
macro description Appends a line to the macro description. IC
show parser macro Displays information about defined macros. PE
Command Description Mode
a
show sntp configuration Displays the SNTP configuration. PE
show sntp server Displays the preconfigured SNTP servers. PE
show sntp status Displays the SNTP status. PE
sntp authenticate Set to require authentication for received NTP
traffic from servers.
GC
sntp authentication-key Defines an authentication key for SNTP. GC
Command Description Mode
a