Dell N1100-ON

Dell EMC Networking CLI 198
Command Line Configuration Scripting
sntp broadcast client enable Enables SNTP Broadcast clients. GC
sntp client poll timer Defines polling time for the SNTP client. GC
sntp server Configures the SNTP server to use SNTP to
request and accept NTP traffic from it.
GC
sntp source-interface Selects the interface from which to use the IP
address in the source IP address field of
transmitted SNTP packets.
GC
sntp trusted-key Authenticates the identity of a system to which
Simple Network Time Protocol (SNTP) will
synchronize.
GC
sntp unicast client enable Enables clients to use Simple Network Time
Protocol (SNTP) predefined Unicast clients.
GC
clock timezone hours-offset Sets the offset to Coordinated Universal Time. GC
no clock timezone Resets the time zone settings. GC
clock summer-time
recurring
Sets the summertime offset to UTC recursively
every year.
GC
clock summer-time date Sets the summertime offset to UTC. GC
no clock summer-time Resets the summertime configuration. GC
show clock Displays the time and date from the system
clock.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
There are no user guidelines
for this command.
Applies commands in the script to the switch. PE
script delete Deletes a specific script. PE
script list Lists all scripts present in the switch. PE
script show Displays the contents of a script file. PE
script validate Validates a script file. PE
Command Description Mode
a