Switch Management Commands 2033
• proc—Display the process crash log.
• kernel—Display the kernel crash data.
• data—Display the crash summary data.
• deleteall—Delete all existing crash logs.
• unit-index—An optional specifier identifying the stack unit number
from which to obtain the crash log.
• comp-id—
• item-number—
• add-param—
Default Configuration
By default, this command displays all crash logs for the specified index.
Command Modes
Privileged Exec mode, User Config mode, all show modes
User Guidelines
There are no user guidelines for this command.
Command History
Introduced in version 6.2.0.1 firmware.
Example
This example displays the most recent crash log for the stack master.
console#debug crashlog 0
Displaying Crash Dump 0
For kernel Crash Dump - osapiDebugCrashDumpDisplay(x,1)
***************************************************
* Start Stack Information *
***************************************************
pid: 32195
TID: -1215952016
Task Name: emWeb
si_signo: 11
si_errno: 0
To Next Page
Loading...
