Dell N1100-ON

To Next Page

To Previous Page

Switch Management Commands 2034

si_code: 1

si_addr: 0x0

Date/Time: 8/13/2011 16:37:31

SW ver: 0.0.0.0

------------ CALL STACK INFO ------------

Stack pointer before signal: 0x00000000

Offending instruction at address 0x00000000

tried to access address 0x00000000

CPU's exception-cause code: 0x00000000

Registers (hex) at time of fault:

r01: 00000000 r02: 00000000 r03: 00000000 r04: 00000000

r05: 00000000 r06: 00000000 r07: 00000000 r08: 00000000 r09: 00000000

r10: 00000000 r11: 00000000 r12: 00000000 r13: 00000000 r14: 00000000

r15: 00000000 r16: 00000000 r17: 00000000 r18: 00000000 r19: 00000000

r20: 00000000 r21: 00000000 r22: 00000000 r23: 00000000 r24: 00000000

r25: 00000000 r26: 00000000 r27: 00000000 r28: 00000000 r29: 00000000

r30: 00000000 r31: 00000000

$0x083da883$ $0x083c9955$ $0x0804b8f6$ $0x0012e40c$ $0x083c73c3$

$0x083c7211$

$0x082b05e3$ $0x081ed66c$ $0x0839db78$ $0x083a0c22$ $0x0839b295$

$0x0839a928$

$0x083a7b73$ $0x08387592$ $0x08372fbc$ $0x08395caf$ $0x083996de$

$0x083d6f71$

$0x00134e99$ $0x0021873e$

-----------------------------------------

***************************************************

* End Stack Information *