4 Fax
102
Fax
4
Step 4 Starting the Fax Job
1
Press the <Start> button.
Important • If the document has been set
in the document feeder, do not
hold down the document while
it is being conveyed.
Note • If a problem occurs, an error
message appears in the touch
screen. Solve the problem in
accordance with the message.
• You can set the next job
during faxing.
If you have more documents
If you have another document, select [Next Original] on the touch screen while the
current document is being scanned. This allows you to send several documents as one
set of data.
2 While documents are being
scanned, select [Next Original].
Note • When the screen at right is
displayed and no operation is
performed during a certain
period of time, the machine
automatically assumes that
there are no more documents.
• When using the document
feeder, load the next
document after the machine
has finished scanning the first
document.
• You can change the scan settings for the next document by selecting [Change Scan
Settings] displayed after selecting the [Next Original].
3 Load the next document.
4 Press the <Start> button.
If you have more documents, repeat Steps 3 and 4.
5 When all documents have been
scanned, select [Last Original].
123
456
789
0 #
C
<Start> button