Fuji Xerox ApeosPort 450 I

System Settings Procedure
251
System Settings
11
User Mode
While still in the System Administration mode, you can carry out normal operations
such as copying and scanning.
Note • To exit a mode entered from [User Mode], use the following procedure.
(1) Press the <Log In/Out> button.
(2) In the [Login] screen, select [Cancel].
System Settings
You can change the default values for the features, and register mailboxes and an
address book (address numbers).
Step 4 Selecting an Item on the [System Settings] Screen
In the [System Settings] screen, select an item to be set.
For the items that can be selected in the system settings, refer to "System Settings Menu List" (P.253).
1 Select an item to be set.
System Settings
You can set or change the default values.
Common Settings
Set the settings relating to the machine itself.
For more information, refer to "Common Settings" (P.264).
Copy Mode Settings
Set the copy feature defaults, copy operation control, button indications, and so on.
For more information, refer to "Copy Mode Settings" (P.287).
Network Settings
Set the ports, protocols, and so on.
For more information, refer to "Network Settings" (P.295).
Print Mode Settings
Set the memory settings, print operation control, and so on.
For more information, refer to "Print Mode Settings" (P.300).
Scan Mode Settings
Set the scanner feature defaults, button indications, and so on.
For more information, refer to "Scan Mode Settings" (P.306).
Fax Mode Settings
Set the fax feature defaults, fax operation control, button indications, and so on.
For more information, refer to "Fax Mode Settings" (P.312).