On-hook/Others
143
Fax
4
On-hook (Confirming Remote Machine Response Prior to Transmission)
Use this feature when using Manual Send.
Manual Send is a transmission method that involves confirming the remote machine
response with an external telephone or when the machine is in an on-hook state prior
to beginning transmission.
In this case, it is recommended to have the line monitor volume set to "Loud".
Note • When an error occurs from the second page while sending multiple pages, the first page
may end abnormally.
The line monitor volume can be changed in the System Administration mode. For information on how to
change the values, refer to "Line Monitor Volume" (P.269).
1 Pick up the telephone or select
[On-hook (Manual Send/Receive)]
on the [On-hook/Others] screen.
2 Select any item.
îš„Send/Receive
Switching between Manual Receive and Manual Send.
z
Manual Send: Confirms remote machine response prior to transmission
z
Manual Receive: Used for receiving fax manually, such as Facsimile Information
Services.
îš„Alphanumeric
The [Keyboard] screen is displayed.
Specify destination using the
keyboard.
Note • When the line type is set to a
pulse line, [Tone (:)] does not
appear. When you are using a dial line, select [Tone (:)] if you want to send out touch-tones
(for a service requiring the use of a pulse line).
• Some types of services cannot be used even if you set the machine to send out touch-tones.
îš„Symbol
The [Symbol] screen is displayed.
Specify destination using symbols.
îš„Exit (Line Cut)
Cut the line connected.
To Next Page
Loading...
Need help?
General
