11 System Settings
310
System Settings
11
Output Size Defaults
Set the sizes to be displayed at [Output Size] when selecting [Auto %] for scanning
documents at [Reduce/Enlarge] in the [Scan Options] screen.
Any output sizes can be assigned to output size buttons 1 to 8. By setting the commonly
used sizes, you can reduce the number of selection operations for scanning.
1 Select [Output Size Defaults].
2 Select the item to be set or
changed, and select [Change
Settings].
Note • Select [ ] to return to the
previous screen or [ ] to
move to the next screen.
3 Select the setting value.
4 Select [Save].
îš„A/B Series Size
You can select from 10 sizes of A and B series.
îš„Inch Size
You can select from 12 sizes of inch series.
îš„Others
You can select from 13 other sizes.
Reduce/Enlarge Presets
Set the magnifications shown in [Preset %] for [Reduce/Enlarge] in the [Scan Options]
screen.
You can assign any magnification to the R/E Preset buttons 1 to 7 other than [100%].
1 Select [Reduce/Enlarge Presets].
2 Select the item to be set or
changed, and select [Change
Settings].
Note • Select [ ] to return to the
previous screen or [ ] to
move to the next screen.
3 Select [Preset %] or [Variable %].
4 Select the setting value.
5 Select [Save].
îš„Preset %
You can select from 20 ratios for [Preset %].
îš„Variable %
You can set any magnification. You can specify the value within the range from 25 to
400% in 1% increments.
To Next Page
Loading...
Need help?
General
