4 Fax
138
Fax
4
5 Select [Save].
6 Select [Polling] on the [On-hook/
Others] screen.
7 Select [On].
Off
Private Polling is not applied.
On
Private Polling is applied.
iFax Profile (Specifying iFax Profiles)
A profile is specified to restrict attribute information such as image resolution and paper
size for transmissions between iFax compatible machines.
Note • This feature may not be displayed depending on the model of machine you are using. This
feature is optional. For more information, contact our Customer Support Center.
• The profiles that can be processed differ depending on the iFax compatible machine of the
recipient. Before specifying a profile, confirm the profiles the iFax compatible machine of the
recipient can process.
• If inconsistencies occur between the profile and the stored document size and resolution
combination, priority is given to the settings specified in the profile.
• If the profile differs for each recipient when using Relay Broadcast, the smallest size
becomes the maximum image size.
• You can set an iFax profile for each address number. For information on how to register
address numbers, refer to "Address Book (Address Number)" (P.347).
• The default values of [iFax Profile] can be changed in the System Administration mode. For
information on how to change the default values, refer to "iFax Profile" (P.314).
1 Display the [Basic Features] screen
by selecting the [Basic Features]
tab.
2 Select [iFax/Fax] several times to
display [iFax] in the recipient
section.
3 Display the [Send Options] screen
by selecting the [Send Options]
tab.
4 Select [iFax Profile].
5 Select the profile.
To Next Page
Loading...
