15 Maintenance
440
Maintenance
15
Note • If dirt does not come off easily, gently wipe with a soft cloth moisten with a small amount of
neutral detergent.
2 Wipe the document glass with a soft cloth moistened with water to remove any dirt,
and then wipe it off with a soft, dry cloth.
Important • Do not use cleaning agents other than water or neutral detergent.
Note • If dirt does not come off easily, gently wipe with a soft cloth moisten with a small amount of
neutral detergent.
Cleaning the Film and Constant Velocity Transport Glass
If the machine is equipped with a document feeder, and its film and constant velocity
transport glass are dirty, streaks or smears may appear on copies and the machine
may not properly detect document sizes.
To ensure clean copies at all times, clean the film and constant velocity transport glass
about once a month.
Important • Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint
or coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction or damage documents during copying.
1 Wipe the film section with a soft
cloth moistened with water to
remove any dirt, and then wipe it
with a soft, dry cloth.
Important • Do not press the film with an
excessive force as it can be
easily damaged.
• Do not use cleaning agents
other than water or neutral
detergent.
Note • If dirt does not come off easily, gently wipe with a soft cloth moisten with a small amount of
neutral detergent.
2 Wipe the constant velocity transport glass with a soft cloth moistened with water to
remove any dirt, and then wipe it with a soft, dry cloth.
Important • Do not use cleaning agents other than water or neutral detergent.
Note • If dirt does not come off easily, gently wipe with a soft cloth moisten with a small amount of
neutral detergent.
Cleaning the Document Feeder Roller
If the machine is equipped with a document feeder and if the document feeder roller is
dirty, streaks or smears may appear on copies and paper jams may occur.
To ensure clean copies at all times, clean the document feeder roller about once a
month.
Important • Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint
or coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction or damage documents during copying or printing.
Film
Constant velocity
transport glass
To Next Page
Loading...
