16 Problem Solving
518
Problem Solving
16
3 Return the lever 2b to the original position.
4 Close the front cover of the finisher.
Note • A message will be displayed and the machine will not operate unless the front cover is
completely closed.
Paper Jams at 2b in the Finisher (Using the Wheel 2c)
1 Open the front cover of the finisher.
2 Move the lever 2b to the right.
3 Turn the wheel 2c in the direction
of the arrow to eject the jammed
paper.
4 Gently remove the paper.
Note • If paper is torn, check for any
torn pieces of paper inside the
machine.
5 Return the lever 2b to the original
position.
6 Close the front cover of the finisher.
Note • A message will be displayed and the machine will not operate unless the front cover is
completely closed.
2b
To Next Page
Loading...
Need help?
General
