Copy Mode Settings
287
System Settings
11
Copy Mode Settings
In [Copy Mode Settings], you can make settings relating to the copy feature. The
following shows the reference section for each item.
Basic Copying Tab................................................................................................................... 287
Copy Defaults........................................................................................................................... 289
Copy Control............................................................................................................................ 291
Original Size Defaults .............................................................................................................. 294
Reduce/Enlarge Presets ............................................................................................................ 294
1 In the [System Settings] screen,
select [System Settings].
For the method of displaying the [System
Settings] screen, refer to "System Settings
Procedure" (P.250).
2 Select [Copy Mode Settings].
3 Select the item to be set or
changed.
Basic Copying Tab
You can change the tray and an enlargement/reduction ratio appearing in the [Basic
Copying Tab] screen. By setting most commonly used tray and ratio settings, you can
reduce the number of selection operations for making a copy.
1 Select [Basic Copying Tab].
2 Select the item to be set or
changed, and select [Change
Settings].
Note • Select [ ] to return to the
previous screen or [ ] to move to the next screen.
3 Select the setting value.
4 Select [Save].
To Next Page
Loading...
