EasyManua.ls Logo

Fuji Xerox ApeosPort 450 I

Fuji Xerox ApeosPort 450 I
609 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17 Appendix
580
Appendix
17
O The job can be executed during the interrupt mode.
X The job cannot be executed during the interrupt mode.
U The job request is accepted, but cannot be executed during the interrupt mode.
*1 The job instruction from the control panel is required/not required to execute the job.
*2 Regular Print, the first set of Sample Print, Delayed Print (auto print)
*3 Security Print, Private Print, Sample Print, Delayed Print, Charge Print
Note The followings jobs are executed regardless of the interrupt mode.
- Automatic fax transmission (to mailbox/relay broadcast)
- Fax reception
Notes and Restrictions on the Use of the iFax Feature
Notes on E-mail Transmissions
"Doc. Sent" that appears on the communications confirmation screen, activity report,
or transmission report indicates that an e-mail has been delivered to the SMTP server,
which was configured on the machine for transmitting e-mail. The e-mail, however, may
not reach its destination for some problem over the Internet. In such case, the machine
will not be notified of such transmission error. After sending an important e-mail, we
suggest you to confirm it is received, such as by calling the recipient.
Feature Combinations when Transmitting an iFax
z
[Resolution] on the [Basic Features] screen
When [TIFF-S] is selected for [iFax Profile] on the [Send Options] screen, [Superfine
(400 dpi)] or [Superfine (600 dpi)] cannot be selected.
For information on iFax profiles, refer to "iFax Profile (Specifying iFax Profiles)" (P.138).
z
[Communication Mode] on the [Send Options] screen
The communication mode can be specified only when sending e-mail using the fax
gateway feature. For other cases, e-mail is sent via G3 Auto.
For information on the fax gateway feature, refer to "Sending an iFax to Normal Fax Machine via a
Relay Station" (P.109).
z
[Scan Size] on the [Scan Options] screen
When [TIFF-S] is selected for [iFax Profile] on the [Send Options] screen, iFax is sent
in A4 even if a size larger than A4 is specified.
For information on iFax profiles, refer to "iFax Profile (Specifying iFax Profiles)" (P.138).
Mailbox Automatic forwarding of a stored document,
automatic fax/iFax transmission
Not
required
X
Printing of a stored document (Fax Private
Polling/Fax to Mailbox) instructed from the
control panel
Required O
Printing of a stored document (scanned
document/print document) instructed from the
control panel
Required X
Automatic printing of a stored document Not
required
X
Job Flow
Sheet
Execution of a job flow sheet instructed in
[Mailbox] or [Job Flow Sheets] on the touch
screen
Required O

Table of Contents

Related product manuals