13 Machine Status
402
Machine Status
13
Consumables
You can check the status of consumables on the [Consumables] screen. The status of
consumables is shown as "Ready", "Replace Soon", or "Replace Now".
The following describes the procedure for checking the status of consumables.
For information on replacing consumables, refer to "Replacing Consumables" (P.426).
1 Press the <Machine Status>
button.
2 Select the [Consumables] tab.
On the [Consumables] screen, you can check the following items.
Note • Items displayed may vary depending on installed options.
• Staple Cartridge : Displayed when a B Finisher, C Finisher, or C Booklet Finisher is
installed.
• Hole Punch Container (R4) : Displayed when a C Finisher, or C Booklet Finisher is
installed.
• Booklet Staple Cartridge : Displayed when a C Booklet Finisher is installed.
Important • If using a partly consumed toner cartridge (such as a toner cartridge removed from another
ApeosPort 550 I/450 I /350I, or DocuCenter 550 I/450 I unit), the status shown may not
match the actual remaining amount. When replacing toner cartridges, we recommend you
use new ones.
z
Toner Cartridge
z
Booklet Staple Cartridge (R2)
z
Drum Cartridge
z
Booklet Staple Cartridge (R3)
z
Staple Cartridge (R1)
z
Hole Punch Container (R4)
To Next Page
Loading...
Need help?
General
