Printing and Deleting Stored Documents
373
Job Status
12
Printing and Deleting Stored Documents
This section describes how to print or delete documents stored by the secure print or
sample print feature, or stored by the charge print receiving control. The [Job Status]
screen allows you to print or delete the documents.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
The following shows the reference section for each item.
Charge Print.............................................................................................................................. 373
Secure Print .............................................................................................................................. 375
Sample Print ............................................................................................................................. 376
Delayed Print............................................................................................................................ 377
Public Mailbox ......................................................................................................................... 378
1 Press the <Job Status> button.
2 Select the [Stored Documents] tab.
Charge Print
When the Authentication feature is used, print jobs which have failed authentication
(incorrect information on a printer driver, such as a user ID and password) are
processed according to the settings in [Charge Print Settings].
This section describes how to print or delete documents stored by the charge print
receiving control.
For details on the charge print settings, refer to "Charge Print Settings" (P.363).
1 Press the <Log In/Out> button.
2 Enter the user ID using the numeric
keypad or the keyboard displayed
by selecting [Keyboard], and select
[Confirm].
3 Select [Charge Print].
4 Select the user to be checked, and
select [Document List].
Note • Select [Refresh] to display the
updated information.
• Select [ ] to return to the previous screen or [ ] to move to the next screen.
• Entering a 3-digit user ID with the numeric keypad specifies the user directly.
5 Enter the password, and select
[Confirm].
Note • If no password is set, the
screen for entering a
password will not appear.
To Next Page
Loading...
Need help?
General
