16 Problem Solving
516
Problem Solving
16
3 Move the lever 2a to the right.
4 Remove the jammed paper.
Note • If paper is torn, check for any
torn pieces of paper inside the
machine.
5 Return the lever 2a to the original position.
6 Close the front cover of the finisher.
Note • A message will be displayed and the machine will not operate unless the front cover is
completely closed.
Paper Jams at 2a in the Finisher (Using the Wheel 2c)
1 If a part of the jammed paper is
visible from the exit of the output
tray, gently pull the paper out.
2 Open the front cover of the finisher.
To Next Page
Loading...
Need help?
General
