11 System Settings
278
System Settings
11
Relay Broadcast Report
Select whether or not to automatically print a relay broadcast report, and a location
where the report is printed at.
îš„Off
Does not print a report automatically.
îš„Send to Relay Station
Sends a report to the relay station specified by the machine.
îš„Print at Local Station
Prints a report on the machine.
îš„Send to Relay, Print at Local
Sends a report to the relay station specified by the machine, and also prints on the
machine.
2 Sided Report
When printing a report/list, select whether to print 1-sided or 2-sided.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
Recipient on Activity Report
Specify how the information on recipients is shown when printing an activity report.
îš„First 40 characters
Show the first 40 characters.
îš„Last 40 characters
Show the last 40 characters.
Maintenance
You can initialize the hard disk or delete data recorded in the machine.
1 Select [Maintenance].
2 Select the item to be carried out.
Initialize Hard Disk
Initializes data stored in the hard disk.
The data erased by the initialization includes supplementary fonts, ESC/P form, HP-
GL/2 form, and SMB folders.
Note • Some does not appear for some models.
• The secure print documents and logs are not erased.
To Next Page
Loading...
Need help?
General
