Fax Mode Settings
313
System Settings
11
Fax Screen Default
Set the default screen that appears when the [Fax/Internet Fax] screen is displayed.
Select from [Basic Features] and [Address Book].
Address Book Default
Set the entry number from which the address book display starts. Set the address
number in the range from 1 to 500.
Note • When the Speed Dial Extension Kit is installed, you can set a value up to 999.
Transmission Screen
Set whether to display the transmission progress during transmission.
Fax Defaults
You can set the default values for the fax feature. When the power is turned on or the
machine returns from a Power Save mode, or when the <Clear All> button is pressed,
the system returns to the defaults set here. By setting features you often use as
defaults, you can avoid extra operations required in use.
1 Select [Fax Defaults].
2 Select the item to be set or
changed, and select [Change
Settings].
Note • Select [ ] to display the
previous screen and select [ ] to display the next screen.
3 Set the setting value.
4 Select [Save].
Resolution
Set the default value for [Resolution] in the [Basic Features] screen.
Original Type
Set the default value for [Original Type] in the [Basic Features] screen.
Lighten/Darken
Set the default value for [Lighten/Darken] in the [Image Quality] screen.
Mixed Size Originals
Set the default value for [Mixed Size Originals] in the [Scan Options] screen.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
Stamp
Set the default value for [Stamp] in the [Scan Options] screen.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
To Next Page
Loading...
