Using ESC/P Emulation
545
Appendix
17
Basic Settings
Setting Item
Item
Number
Value
Paper tray 3 Sets the paper tray to be used for printing.
[0] : Auto
[1] (Default) : Tray 1
[2] : Tray 2
[3] : Tray 3
[4] : Tray 4
[5] : Tray 5 (Bypass)
[6] : Tray 6 (High Capacity)
If printing from Tray 5 (Bypass), instruct printing and then operate the
machine to start printing. To cancel the setting, change the setting for
"Tray 5 Confirmation".
Important • When Trays 1, 2, 3, 4 or 6 is selected, the size of paper loaded in the
tray becomes the output paper size, and thus [Paper Size] cannot be
set.
Note • When [Auto] is selected, and if the paper of the same size is loaded in
the same orientation in multiple trays, paper will be supplied in the
order of Tray 1 J Tray 2 J Tray 3 J Tray 4 J Tray 6. If paper of the
same size is loaded in multiple trays but in different orientations, the
paper loaded in the landscape orientation is given priority.
Document size 1 Sets the client-created document size.
[99] (Default) : Paper
[100] : Continuous form paper (10 x 12)
[101] : Continuous form paper (10 x 11)
[102] : Continuous form paper (15 x 12)
[103] : Continuous form paper (15 x 11)
[3] : A3
[4] : A4
[5] : A5
[14] : B4
[15] : B5
[21] : 8.5 x 14
[22] : 8.5 x 13
[23] : 8.5 x 11
[24] : 11 x 17
[0] : Postcard
The number of characters printed is: 80 characters/72 rows for
continuous form paper (10 x 12), 80 characters/66 rows for continuous
form paper (10 x 11), 136 characters/72 rows for continuous form paper
(15 x 12), and 136 characters/66 rows for continuous form paper (15 x
11).
Note • When a continuous form paper is selected for [Original Size], [Paper
Position] cannot be set.
• When [Preset%] or [Fit to Cut Sheet] is selected for [Reduce/Enlarge],
the machine automatically calculates the magnification based on
[Original Size] and [Paper Size]. If the magnification, however, is not
within 45-210%, the original will not be reduced/enlarged, and will be
printed in a scale of 100%. When [2 Up] is selected, the machine
automatically calculates the magnification based on [Original Size]
and 1/2 of [Paper Size].
• The orientation set here is that of the original. It is not affected by the
orientation of paper loaded in the paper trays.
Orientation 19 Sets the orientation of paper.
[0] (Default) : Portrait
[1] : Landscape
To Next Page
Loading...
