Output Format
79
Copy
3
Transparency Separators
(Inserting Blank Sheets between Transparencies)
A blank sheet can be output inserted as a separator between copied transparencies.
At the same time, the required number of copies for distribution is printed. When
loading transparencies, make sure that the paper for the separators (or for distribution)
is loaded at the same orientation as that of the transparencies.
Important • Use V516 (Xerox film [no border]) transparency sheets. Using transparency sheets for color
(V556/V558 [with white boarder]) may cause a malfunction or paper jam.
Note • When loading A4 size transparencies on Tray 5 (bypass), we recommend loading them
vertically.
1 Select [Transparency Separators].
2 Select any item.
îš„No Separators
Separators are not inserted.
îš„Blank Separators
A separator is inserted each time a transparency is copied. Only one set of copies can
be made.
îš„Blank Separators & Distribution Sets
A separator is inserted each time a transparency is copied. At the same time, the
required number of copies for distribution is printed.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
îš„No Separators & Distribution Sets
Copies are made on transparencies and the required number of copies for distribution
is printed.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
îš„Transparency Tray
Displays the [Transparency Separators - Transparency Tray] screen.
Select the tray in which transparencies are loaded. Select trays used as the
transparency tray and the separators tray in which paper of the same size and same
orientation is loaded.
When [Bypass...] is selected, the [Tray 5 (Bypass)] screen appears. For more information, refer to "[Tray
5 (Bypass)] Screen" (P.58).
îš„Separators Tray
Displays the [Transparency Separators - Separators & Distribution Sets Tray] screen.
Select the tray for separators. Select trays used as the transparency tray and the
separators tray in which paper of the same size and same orientation is loaded.
When [Bypass...] is selected, the [Tray 5 (Bypass)] screen appears. For more information, refer to "[Tray
5 (Bypass)] Screen" (P.58).
To Next Page
Loading...
Need help?
General
