Machine Status
389
Machine Status
13
Default Programming
You can start the printer in the print modes stored in the memory.
1 Select [Default Programming].
2 Select [Factory Defaults] or
[Custom Settings].
3 When you select [Custom
Settings], select the memory
number to be used.
îš„Factory Defaults
You can use the factory default settings.
îš„Custom Settings
The numbers stored in the memory appear.
Password
For PDF emulation, if a password is set for PDF files, set the password here in
advance. PDF files can be printed only when their password matches the password set
here.
You can use up to 32 characters for the password.
1 Press [Password].
2 Select [Keyboard].
3 Enter a password (within 32
characters) in [New Password],
and select [Save].
4 Select [Keyboard].
5 In [Re-enter Password], enter the same password, and select [Save].
Fax Receiving Mode
You can set a fax receiving mode.
For information on automatic and manual fax receiving modes, refer to "Receiving Faxes" (P.154).
1 Select [Fax Receiving Mode].
2 Select a fax receiving mode.
îš„Manual Receive
Receives faxes manually. This mode is convenient when you want to identify senders
or communicate with them over an external telephone before receiving their faxes.
îš„Auto Receive
Receives faxes automatically.
To Next Page
Loading...
Need help?
General
