5 Scan
176
Scan
5
Address Book
You can specify the server name, login name and other information from the address
book.
For information on settings of the address book, refer to "Address Book (Address Number)" (P.347).
1 Select [Address Book].
2 Select the destination in which the
data is stored.
Important • You can only use destinations
configured for SMB or FTP.
Any destinations registered for
fax cannot be specified.
Note • Select [ ] to return to the previous screen or [ ] to move to the next screen.
Details
You can confirm information such
as recipient name, transfer
protocol, server name, and IP
address.
Specifying a Forwarding Destination
Enter the information for the fields appropriate to the selected protocol, to specify the
forwarding destination.
1 Select the item to be set.
Note • You can also select [Address
Book] to enter information.
• Fields displayed vary
depending on the protocol.
2 Enter information using the
keyboard on the screen.
For information on how to enter
characters, refer to "Entering Text"
(P.263).
Note • To delete characters, select
[Backspace].
Server
Displayed when [FTP] or [SMB] is selected for [Transfer Protocol]. Enter a server name
or IP address. Up to 64 characters are allowed.
Example: myhost.fujixerox.com
(myhost: host name, fujixerox.com: domain name)
Shared Name
Displayed when [SMB] is selected for [Transfer Protocol]. Enter a shared name. Up to
64 characters are allowed.
To Next Page
Loading...
