Scan to FTP/SMB
177
Scan
5
Save in
z
When [FTP] or [SMB] is selected for [Transfer Protocol].
Enter a directory name.Up to 128 characters are allowed.
z
When [SMB(UNC format)] is selected for [Transfer Protocol].
Enter "\\Host Name\Shared Name\Directory Name". Up to 260 characters are
allowed.
Login Name
Enter the login name of the computer you are forwarding to. Up to 32 characters are
allowed. When [SMB] is selected or no login name is required for the destination, this
field can be skipped.
Password
Enter the password for the login name. Up to 32 characters are allowed.
Important • When [SMB] is selected for [Transfer Protocol], up to 14 characters are allowed.
To Next Page
Loading...
