Facsimile Information Services
157
Fax
4
When Not Using a Receiver
1
Adjust the volume of the line monitor.
We recommend setting the volume of the line monitor to [Loud] so that it is easy to
hear the voice prompts.
For information on how to change the volume of the line monitor, refer to "Line Monitor Volume"
(P.269).
2 Select [On-hook (Manual Send/
Receive)] in the [On-hook/Others]
screen.
3 Select [Manual Receive].
4 Specify the fax number of the facsimile information service.
z
Specify the fax number with the numeric keypad, address number, or one touch
buttons. You cannot use the address book.
z
The keyboard displayed when
selecting [Alphanumeric] or
[Symbol] can also be sued.
Note • When the line type is set to a
pulse line, [Tone (:)] does not
appear.
• When you are using a dial
line, select [Tone (:)] if you
want to send out touch-tones
(for a service requiring the use
of a pulse line).
• Some types of services
cannot be used even if you set the machine to send out touch-tones.
5 When the machine connects to the service, you will hear voice prompts. Follow the
voice prompts to enter the required numbers.
6 When input is finished, press the <Start> button.
To Next Page
Loading...
Need help?
General
