11 System Settings
264
System Settings
11
Common Settings
In [Common Settings], you can make settings relating to the machine itself. The
following shows the reference section for each item.
Machine Clock/Timers..............................................................................................................264
Audio Tones..............................................................................................................................267
Screen Defaults .........................................................................................................................269
Paper Tray Settings ...................................................................................................................271
Set Numbering ..........................................................................................................................275
Image Quality............................................................................................................................276
Reports ......................................................................................................................................277
Maintenance..............................................................................................................................278
Other Settings............................................................................................................................280
1 In the [System Settings] screen,
select [System Settings].
For the method of displaying the [System
Settings] screen, refer to "System Settings
Procedure" (P.250).
2 Select [Common Settings].
3 Select the item to be set or
changed.
Machine Clock/Timers
You can set the clock time, or the time intervals until the power saver or reset features
take effect.
1 Select [Machine Clock/Timers].
2 Select the item to be set or
changed, and select [Change
Settings].
Note • Select [ ] to return to the
previous screen or [ ] to move to the next screen.
3 Select [ ], [ ], or the numeric keypad to enter a value.
Note • Depending on the item, entry with the numeric keypad may not always be possible.
4 Select [Save].