4 Fax
124
Fax
4
Send Options
You can specify fax transmission conditions in the [Send Options] screen. The following
shows the reference section for each feature.
Communication Mode (Selecting a Communication Mode) ....................................................124
Priority Send / Delayed Start (Specifying Send Priority/Send Time).......................................126
Send Header (Adding Sender Name and Phone Number to Faxes) .........................................127
Cover Note (Transmitting Documents With a Cover Page) .....................................................128
iFax Comment (Inserting Comments in Body Text) ................................................................130
Report/Read Receipts/Delivery Receipts (Confirming Transmission Results) ........................131
Recipient Print Sets (Printing Multiple Copies at the Remote Machine) .................................133
Remote Mailbox (Using Remote Mailbox) ..............................................................................133
F Code (Using F Code Transmission).......................................................................................136
iFax Profile (Specifying iFax Profiles) .....................................................................................138
1 Select [Fax/Internet Fax] on the [All
Services] screen.
2 Select the [Send Options] tab and
then select a feature on the [Send
Options] screen that appears.
Communication Mode (Selecting a Communication Mode)
You can select a communication mode based on the features of the remote machine.
G3 is the international standard for facsimile transmissions established by the ITU-T.
Note • When the speed dialing, one touch buttons, group dialing, or address book is used to specify
a recipient registered in a address number, the communications mode currently set to the
address number is set and cannot be changed. For information on how to register address
numbers, refer to "Address Book (Address Number)" (P.347).
Note • The communication mode default value can be changed in the System Administration mode.
For information on how to change the default values, refer to "Communication Mode"
(P.314).
1 Select [Communication Mode] on
the [Send Options] screen.
2 Set the communications mode.
To Next Page
Loading...
Need help?
General
