Common Settings
275
System Settings
11
Enable during Auto Paper
Only when [Auto] is selected for [Paper Supply], the machine automatically selects a
tray containing appropriate paper.
Always Enable
Regardless of which paper tray is selected for [Paper Supply], depending on
circumstances, the machine automatically selects a tray containing appropriate paper.
Note • The machine does not switch the tray automatically in the following cases:
- The Tray 5 (bypass) is selected.
- The tray containing paper other than plain paper, recycled paper, side 2 paper, or
Custom1 to Custom5 paper is selected.
- The tray containing paper that is set as [Auto Paper Off] in [Paper Type Priority] is
selected.
Set Numbering
You can make settings relating to the set numbering.
1 Select [Set Numbering].
2 Select the item to be set or
changed, and select [Change
Settings].
Note • Select [ ] to return to the
previous screen or [ ] to move to the next screen.
3 Set the setting value.
4 Select [Save].
Date Format
Set the format for printing dates in annotations and set numbering. This setting is
common to annotation and set numbering.
Three formats are available: 20yy/mm/dd, dd/mm/20yy, and mm/dd/20yy.
Text Effect
Set text effects for the set numbering.
Off
A text effect is not applied.
Embossed
The text hidden in the background is printed as embossing. The text part of the text is
printed with the pattern set in [Background Pattern].
Outline
The text hidden in the background is printed as white cutout. In the background other
than the text printed as white cutout, the pattern set in [Background Pattern] is printed.
Text Size
Set the size of the text printed in the set numbering.
You can select from three point sizes: 48 points, 64 points, and 80 points.
To Next Page
Loading...
