5 Scan
164
Scan
5
2 While documents are being
scanned, select [Next Original].
Note • When the screen shown right
is displayed and no operation
is performed during a certain
period of time, the machine
automatically assumes that
there are no more documents.
• When using the document feeder, load the next document after the machine has finished
scanning the first document.
• You can change the scan settings of the next document by selecting [Change Scan Settings]
displayed after selecting [Next Original].
3 Load the next document.
4 Press the <Start> button.
If you have more documents, repeat Steps 3 and 4.
5 When all documents have been
scanned, select [Last Original].
Step 4 Confirming the Scan Job in Job Status
1
Press the <Job Status> button.
2 Confirm the job status.
Note • Select [ ] to return to the
previous screen or [ ] to
move to the next screen.
123
456
789
0 #
C
<Job Status>
button
To Next Page
Loading...
