4 Fax
156
Fax
4
Facsimile Information Services
For information on subscriptions and advanced operating procedures, contact the
corresponding facsimile information service.
Using the Receiver
1
Pick up the receiver of the external
telephone.
2 Select [Manual Receive].
3 Specify the fax number of the
facsimile information service.
z
Specify the fax number with the numeric keypad, address number, or one touch
buttons. You cannot use the address book.
z
The keyboard displayed when
selecting [Alphanumeric] or
[Symbol] can also be sued.
Note • When the line type is set to a
pulse line, [Tone (:)] does not
appear.
• When you are using a dial line, select [Tone (:)] if you want to send out touch-tones (for a
service requiring the use of a pulse line).
• Depending on the service, even with the tone transmission operation, it may not be possible
to obtain the service.
4 When the machine connects to the service, you will hear voice prompts. Follow the
voice prompts to enter the required numbers.
5 When input is finished, press the <Start> button.
Note • The <Online> indicator on the control panel lights and reception begins.
6 Replace the receiver.
Important • Be sure to replace the telephone properly. Otherwise, the line will remain in the busy state.
To Next Page
Loading...
Need help?
General
