Replacing Consumables
437
Maintenance
15
3 Discard all the scraps.
4 Insert the empty punch scrap
container into its original position
until it comes to a stop.
5 Close the front cover of the finisher.
Note • A message will be displayed and the machine will not operate if the front cover of the finisher
is not completely closed.
Replacing the Stamp Cartridge
If your machine offers fax service, and if the optional stamp kit is installed, replace the
stamp cartridge when stamp impressions start to fade.
Important • Do not touch the ink pad of the stamp cartridge. If it comes into contact with your skin, wash
immediately.
• Problems caused by using consumables other than what is recommended by us are not
covered by the maintenance service contract.
• Before using consumables, carefully read the instructions and precautions on the
packaging.
Note • We recommend having spare consumables ready.
1 Pull up the handle on the left cover
of the document feeder to open the
cover completely.
To Next Page
Loading...
Need help?
General
