Output Format
81
Copy
3
îš„Off
Poster is not applied to copies.
îš„Output Size
You can select from 7 paper sizes.
îš„Enlargement %
Refer to "When [Enlargement %] is Selected" (P.81).
îš„Paper Tray Settings
Displays the [Poster - Paper Tray Settings] screen.
Select the paper tray to use.
When [Bypass...] is selected, the [Tray 5 (Bypass)] screen appears. For more information, refer to "[Tray
5 (Bypass)] Screen" (P.58).
When [Enlargement %] is Selected
You can specify a different ratio for the height and width.
1 Use [ ] and [ ] to specify the
height and width ratios.
îš„X, Y
Set the height and width ratios within the range from 100 to 400% in 1% increments.
îš„XY
You can simultaneously change the numerical values of the height and width by the
same amount.
Repeat Image (Making Multiple Copies on One Sheet)
A document image can be copied on one sheet of paper repeatedly for a specified
number of times.
When the copy ratio is set to [Auto], the repeated copies of the image are reduced to
fit on the selected paper. You can also specify how the repeated copies of the image
are arranged.
Note • When making repeat copies at the same size as the document image, specify a number of
repeats that will fit on the paper.
1 Select [Repeat Image].
2 Select any item.
îš„Off
Image Repeat is not applied.
To Next Page
Loading...
Need help?
General
